Collection

Suppressor adapter allows you to use any suppressor with 14CCW thread. We recommend the NOVRITSCH Suppressor. Holes on the side for easy removal. Just stick a screw driver through and you will have more grip to unscrew or tighten the adapter.

Only comp

Summer Crafted Ready Rig by Silly Ghillie

VX Buckle Up Compatible
Rear hook and loop compartment for mag sleeve customization
Two elasticated pistol mag / tool pouches
Two zipped general purpose utility pouches
Two hook and loop ID panels on front

G19 Tactical Magwell

Highlighted features
Aluminum 6061 material with CNC machined
3 Colors available: Silver, Black & Flat Dark Earth
Maximum funnel increases the speed of reloads
Compatible with various base pads
For TM G19 Gen3 & Gen4 and Umare

150% G19 Recoil Spring

Highlighted features
Made from High Strength Spring Steel
Hard Coating Prevents Corrosion
Shorten length with harder coil
Improve cycling efficiency
Fully compression by shorten spring length
Cycling enhancement through 2 d

Highlighted features
Stainless Steel material with CNC machined
4 buffers for modification to shorten the cycling
Include Enhance Recoil Spring
Enhance the reaction force to speed up the blowback cycle
3 Colors available: Silver, Titanium Black and T

AAP01 200% Nozzle Spring

Highlighted features
The AAP01 nozzle spring was made by high quality spring steel. Its special design is able to supply an addition tension during cycling and enhance the durability. It can make sure the nozzle movement stabl

84mm 6.04 Crazy Jet Inner Barrel for GBB Pistol

VSR-10 Bolt Handle Kit for Right Hand

Suitable: Tokyo Marui VSR-10 Series Airsoft Sniper
- Steel CNC Construction

Modular 3d camouflage system for general purpose in green vegetation.

Can be used for 3d pattern composition on any given base layer such as jute/burlap ghillies, leaf suits, BDUs, pouches, gloves, backpacks, etc.

Allows quick and realistic camoufla

TAC-41 short polymer magazine, double stack design, holding 48 bbs in a very compact form factor. All internal parts can be disassembly in less than a minute with a simple stick. Black fiber glass reinforced Nylon construction.

Guarder AEG Tune Up Spring (SP120)

•  Color : Black
•  Material: Oil Quenched/Tempered Si-Cr Alloy Steel Wire
•  Suitable for : MARUI All AEG ( exclude PSG-1 )
•  Length : About 170 mm
•  Weight: 20g

Maple Leaf VSR/GBB 60° Decepticon Silicone Hop Up Rubber

For GBB and VSR / L96 open cut barrels (No Bridge).

M-TDC is the new design from Hadron Designs.

The M-TDC is a modular design, so, by changing the plates (click out), then clicking in alternative plates, the M-TDC chassis can utilise two, or three screw pressure advantages.

NO adaptor plates are sup

Action Army L96/Type 96 40 Round Magazine

Action Army High quality replacement cylinder and stainless steel cylinder head for ARES Striker series rifles.

Great build quality and performance

Action Army upgrade 90 piston for the Tokyo Marui L96 rifle. Designed to work with the Action Army 90 Degree L96 trigger.

Precision Double I/D Air-cushion inner barrel by TNT Airsoft.

The TNT barrels are an unusual but effective barrel that starts out at 6.03mm and expands out to 6.35mm with specialised channels cut into the last section.

The idea behind this is to red

T10 / TM L96 / VSR-10 G-Spec Silencer Adapter CCW Black

Screw in adaptor that screws into the existing the barrel end cap of the G-Spec or the end of the barrel on the Tokyo Marui L96

Allows the fitting of any 14mm CCW threaded barrel extension

Action Army Vsr-10 M150 Spring

M150 spring for Tokyo Marui VSR-10 and other clones
Material: Steel Piano Wire
Compatible with 7mm spring guides

Air Seal Hop-Up Rubber Soft Type

Action Army VSR-10 90 Degree Piston, designed to fit the VSR10 and VSR10 clone rifles. Works well with other Action Army upgrade parts.

Action Army 6.01 Barrel 300mm for Marui VSR-10 Gspec. Precision fit tightbore inner barrel to improve range and accuracy of your VSR rifle. 300mmm is the length for standard VSR-10 Gspec rifles and clones

Rubber Set for Tanaka M700 / M24 / L96