Collection

Guarder AEG Tune Up Spring (SP120)

•  Color : Black
•  Material: Oil Quenched/Tempered Si-Cr Alloy Steel Wire
•  Suitable for : MARUI All AEG ( exclude PSG-1 )
•  Length : About 170 mm
•  Weight: 20g

SHS AEG High Torque Motor.

Short Shaft

D Type Pinion

The TNT TR-Hop is an effective and simple to use bucking, it offers good compression and has a long concave patch for increased range and accuracy.

The TR-Hop series of buckings work well with a variety of barrels and nubs, including the TNT T-Nub and

Chamber Set for Marui/WE/KJ M1911 Series

Magazine VSR-10 50rds

Action Army 50 round magazine for VSR10 and VSR10 clones

The Action Army teflon cylinder kit for the VSR-10 and VSR10 clones is an upgraded cylinder with cylinder head, works very well and with most TM VSR10 spec pistons.
Compatible with Marui VSR-10 & clones, HFC VSR 11, JG BAR-10
Teflon Coated
Stainless

Super Macaron Hop Up Rubber 50° for AEG

Compatible with bridged and unbridged inner barrels enabling VSR / GBB barrels to be used in AEG hop units.

Super Macaron bucking features an Rhop style contact patch which centres the BB and improves consiste

Maple Leaf DECEPTICON Hop Up Bucking 50 Degree

The all-new Maple Leaf Decepticon hop up which features a high quality pressure seal reducing power loss and stabilizing the BB trajectory. Maple Leaf are a well-known brand from Taiwan for making quality

Compatible with most aeg gearboxes
Color: red
Assists in firing consistent fps with every shot
Ported piston head design enhances compression
Lightweight aluminum alloy with a smooth finish
Precision made ball bearings alleviate spring tension
Two h

Type: Nickel-Metal Hydride
Voltage: 8.4v
Capacity: 1600 mAh
Connector: Mini Tamiya
Configuration: Nunchuck
Dimensions:Stick 1: 95mm x 20mm, Stick 2: 120mm x 20mm

High Quality Silicone Leads

KMCS Face Cover, perfect accessory to go along with your ghillie suit, lightweight mesh, breathable. No longer fog up from your breath.

The same awesome hop nub for the Tokyo Marui MWS but now CNC machined from 7075 Aluminium!

If you are fitting an upgrade nub into the MWS gas rifle, it is one of the cheapest upgrades you can do with great gains compared to the standard setup.

There

⚠ Only required if you have after-market upper like Black Mamba, FUKU-2, etc.

This is a universal drill jig made to work with most aftermarket AAP-01 uppers as it is in the shape of a hop up chamber and mounts using the same screws.

This part is NOT

TP22 Stainless Steel Hammer

RS / HTI FAST Hop-Up Unit + hopup rubber (SBA-HOP-21)

FAST (Field Adjustment SeTting ) hop up for Silverback SRS (all versions) and HTI. 6061 aluminium CNC machining hop-up unit for the Silverback SRS. Allows to adjust your hop up in-game without any t

SRS-A2/M2 22’’

For right-handed shooters



The Silverback SRS-A2 22” is our licensed version of the Desert Tech Scout Recon Stealth A2 bullpup sniper rifle, latest model of the SRS line.



The SRS monolithic receiver, made of aeronautical g

Available in 3 sizes
4-slot
3-slot
2-slot

●For MLC-S2 Folding Chassis/MLC-LTR/Novritsch SSG10A3 Sniper Rifle
●Made from CNC machined aluminium with black anodized finish.
●M-LOK interface rail system for any M-LOK spec accessories like a bipod or

This is a lightweight, fully CNC machined VSR-10 Bolt Handle by Action Army. It's similar to the one made by PDI, but far more affordable. This Bolt Handle is very durable and gives your replica a unique custom look. Coated matte black for corrosion resis

Magazine for the Tokyo Marui AKX and AKM series gas blowback airsoft rifles. Finished in a bakelite style for that authentic AK look.
This aluminium magazine (35 rounds) boasts a realistic Bakelite design achieved through special printing and surface tre

Color may vary slightly depending on batch.

The new-generation PULSAR S Nozzle, with an improved design that provides faster nozzle response, allows setting shorter solenoid valve opening times, and hard anode for greater durability and reduced frictio

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

Better than the original loader that came with your AKM, it’s not the fastest when loading the tube with 15 BBs multiple times. Jamming them down with that plastic rod like your life depends on it can be frustrating if you’re in a rush and the next game i

KMCS Face Cover, perfect accessory to go along with your ghillie suit, lightweight mesh, available in both woodland floor and dark forest.

Features

Colour Black.

Laser IR and Visible Red

Visible illuminator.

Anchor for RIs Picatinny Quick Release System

Works with CR123A batteries. (Not included)