Collection

3 "Shark Fins" Inside to prevent misfeeds
2 Rubbers & X Type Nubs
60 Degree Rubber

A popular upgrade over standard hop rubbers. The Shark Red version has 3 fins on the inside compared to the all smooth Thunder Series Blue version from MADBULL.

The Madbull Sniper Accelerator Hopup Bucking is designed with a soft rubber and silicon material to allow for maximum adjustment and increase overall performance of your sniper rifle.

The bucking is specially designed to seal compressed air and preven

Weight: 11 g
Shipping weight: 20 g

This barrel is made of stainless steel (SUS304)

Wide HOP window 4.7mm x 6.7mm
Muzzle end ,10mm Tapered crown for smooth air flow
Internal Dia. : 6.05mm
Outer Dia. : 8.55mm
Tapered length : 10 mm
For Hi-Capa 5.1

Maple Leaf 310mm 6.02mm inner barrel.

Hybrid cut for use in GBB and AEG.

Requires Maple Leaf Hybrid or Hot Shot bucking if used in an AEG.

Nineball TM17 Gas Route Packing Aero

Offers better airflow, seal and consistency.

This is a single pack

Action Army Cylinder Kit for Tokyo Marui L96

High quality replacement cylinder and stainless steel cylinder head for the Tokyo Marui L96 series rifles.

Action Army upgrade 90 piston for the Tokyo Marui L96 rifle. Designed to work with the Action Army 90 Degree L96 trigger.

Xcortech X3200 MK3 Chronograph

Xcortech X3200 MK3 Chronograph (New Version)

Specification

Velocity rest range:
Initial Velocity measure range: 30.00 ~ 400.0 (m/s)
ROF measure range: 100 ~ 5000 (RPM)
Support Camera Tripod mount
Tube diameter 2

Precision Double I/D Air-cushion inner barrel by TNT Airsoft.

The TNT barrels are an unusual but effective barrel that starts out at 6.03mm and expands out to 6.35mm with specialised channels cut into the last section.

The idea behind this is to red

Precision Double I/D Air-cushion inner barrel by TNT Airsoft.

The TNT barrels are an unusual but effective barrel that starts out at 6.03mm and expands out to 6.35mm with specialised channels cut into the last section.

The idea behind this is to red

GEOFFS™ SUPER NATURAL PRECISION™ PLA based Bio BBs, containing no harmful or toxic materials and manufactured to the highest industry standards are a forefront in quality to enhance the performance of your game.

GEOFFS™ SUPER NATURAL PRECISION™ PLA based Bio BBs, containing no harmful or toxic materials and manufactured to the highest industry standards are a forefront in quality to enhance the performance of your game

VSR-10 G-Spec Inner Barrel Spacer Set

Inner barrel stabilisation spacers for the VSR-10 Gspec and the Tokyo Marui L96 AWS sniper rifles

135mm CCW/CW 14mm & CW 16mm Suppressor

High pressure 90° VSR piston for use with all kinds of 90°/Zero triggers.

Works best with my SCW Spring guide for VSR.

Airbrake can be modified to desired length.



Key specs :

- Able to take 13 mm springs.

- Quiet

- Smooth operation

Durable, robust 90° design prepared for strongest upgrades

- ALL Stainless steel construction
- Preserved safety function ( use original safety lever )
- Adjustable trigger OVER-TRAVEL
- DROP-IN instalation
- Optimized trigger pull ( around 0,5 lb

The Silent Industries Advanced Cylinder Head is designed to give the absolute best air seal, impact dampening and nozzle fitment.

Type: LiPo - Lithium Polymer
Voltage: 7.4 v
Capacity: 1250 mAh
Connector: Deans
Continuous Rate: 20 C at 24 A
Burst Rate: 40 C at 48 A
Configuration: Stick
Dimensions: 20 x 10 x 104 mm



Capacity - LiPo Batteries have an excellent Capacity to

This CNC machined stainless steel selector plate features an upgraded design and quality stainless steel. This is perfect for those who have upgraded to stainless steel hammer sets and for those who are looking for a more quality and durable build.

APS 13 mm, 120 Newtons spring



This spring is following the “APS 13 mm standard” (for 9 mm outside diameter spring guide). It will fit any rifle compatible with this standard, including all SRS (except the discontinued “push bolt” mechanism) and al

⚠ Only required if you have after-market upper like Black Mamba, FUKU-2, etc.

This is a universal drill jig made to work with most aftermarket AAP-01 uppers as it is in the shape of a hop up chamber and mounts using the same screws.

This part is NOT

This dust cover covers the exposed hole in the AAP-01 grip. Installed in place with screw.

COMPATIBILITY
✔ Compatible with AAP-01
✔ Compatible with AAP-01C
✔ Compatible with CTM 1911 Frame Grip
⚠ Unknown compatibility with CTM FUKU-2 Frame Grip

“GBB” type, flat hopup rubber, 4 hardness set (50°/60°/70°/80°)



Initially designed for the TAC-41 “GBB” hopup, this hopup rubber can fit inside most of airsoft guns using “GBB” hopup rubber.

Transparent silicone for easier installation, this ki