Collection

Action Army VSR-10 90 Degree Piston, designed to fit the VSR10 and VSR10 clone rifles. Works well with other Action Army upgrade parts.

Action Army VSR10/T10 Guide Rings, designed to work with VSR10 and VSR10 clone rifles. can be used to replace worn guide rings.

Action Army 6.01 Barrel 300mm for Marui VSR-10 Gspec. Precision fit tightbore inner barrel to improve range and accuracy of your VSR rifle. 300mmm is the length for standard VSR-10 Gspec rifles and clones

VSR-10 Rail Bubble Lever Green

Maple Leaf DECEPTICON Hop Up Bucking 60 Degree

The all-new Maple Leaf Decepticon hop up which features a high quality pressure seal reducing power loss and stabilizing the BB trajectory. Maple Leaf are a well-known brand from Taiwan for making quality

AAP01 Blow Lock Spring

Highlighted features

Made from High Strength Spring Steel
For Action Army AAP01

Silverback GBB Type Flat Hop Up rubber 80 degree (4 pack)

“GBB” type, flat hopup rubber, 80°, pack of 4

Initially designed for the TAC-41 “GBB” hopup, this hopup rubber can fit inside most of airsoft guns using “GBB” hopup rubber.

Transparent

“Vauban” style Bolt Knob.

Nylon, fiberglass reinforced.

Steel nut (ISO4032), M8x1.25 thread.

21 Grams.

Compatible with SRS/HTI/TAC-41.

The hardened steel parts are manufactured under CNC process.

They have strengthen construction and increase durability.

The Jaeger Precision AKM/AKX downgrade valve is a must for any user wanting to get their power under site limits using heavier gasses like green gas and propane.

These downgrade valves are now CNC machined from POM engineering plastic and are no longe

Blend in with nature! Our KMCS Boot Cover is designed for activities such as military, airsoft, hunting, photography, or nature walks. Featuring laser-cut leaf fabrics on top, this cover enhances your concealment, allowing you to seamlessly integrate with

Vibration is the worst enemy of fasteners. Every airsoft gun, including springers, will vibrate under operation. Therefore, it is very important to utilize thread lockers on fasteners which retain critical components and expensive accessories! Upon curing

Vibration is the worst enemy of fasteners. Every airsoft gun, including springers, will vibrate under operation. Therefore, it is very important to utilize thread lockers on fasteners which retain critical components and expensive accessories! Upon curing

TTI AIRSOFT WE Galaxy G-series Inner Barrel 116mm (TM Spec not compatible with WE Galaxy standard hop up chamber)

APS 13 mm, 120 Newtons spring



This spring is following the “APS 13 mm standard” (for 9 mm outside diameter spring guide). It will fit any rifle compatible with this standard, including all SRS (except the discontinued “push bolt” mechanism) and al

Are you also tired of having BB's spilled everywhere when reloading your mags with ODIN M12 speedloader? That's why we made an improved nozzle that solves this.
Drop-in replacement for original nozzle
BB retention mechanism to avoid spilling with replac

General:

Size: 91.6 cm minimum
Minimum weight: 2.08kg (with magazine)
Fully ambidextrous design (bolt handle, magcatch, safety, hop-up adjustment)




Receiver:

6000 series CNC Aluminium receiver with unique serial number
POM sliding ring

SRS-A2/M2 22’’

For right-handed shooters



The Silverback SRS-A2 22” is our licensed version of the Desert Tech Scout Recon Stealth A2 bullpup sniper rifle, latest model of the SRS line.



The SRS monolithic receiver, made of aeronautical g

CNC Aluminum Hopup Chamber MGW (For MTW M4)

Magazine for the Tokyo Marui AKX and AKM series gas blowback airsoft rifles. Finished in a bakelite style for that authentic AK look.
This aluminium magazine (35 rounds) boasts a realistic Bakelite design achieved through special printing and surface tre

The GATE EON Gearbox V2 is a 7075 CNC aluminum constructed version 2 gearbox shell with a variety of features. This gearbox shell comes with a scratch card that gives you a free 1-level-up firmware upgrade of GATE TITAN or ASTER. Users of GATE ETUs will a

The CTM AAP-01 AP7-SUB Picatinny Adapter replaces the rear block and sliding stock of the AP7-SUB Kit and allows the fitment of a Picatinny Stock in the style of the SIG side folding versions. Great for making your AP7-SUB Kit unique!

CNC'd Alloy
Spec

The CTM 14mm CCW R-Style CNC Flash Hider looks good whether on the Action Army AAP-01 or a rifle.

Weighing only 34.1g, they are not heavy and definitely unique! Why not use the Action Army Upper Receiver Connector ( U01-011 ) and make it totally unique

realistic bolt-catch - function working with the magazine sensor. After reloading, you must press the bolt-catch button to enable firing, just like in a real gun.

magazine BB counter reset. The function works with a programmable magazine capacity limit