Collection

Maple Leaf VSR Bull Outer Barrel.

For use with 430mm inner barrel.

CNC Aluminium.

Includes Barrel end cap.

Female 28mm CW barrel end thread.

AEG 310mm 6.02mm Tight Bore inner barrel with Bridge.

(Bridged) Hybrid cut for use in GBB and AEG.

Maple Leaf GBB Buckings will not fit due to bridge, other brand buckings should fit.

TAC-41 short polymer magazine, double stack design, holding 48 bbs in a very compact form factor. All internal parts can be disassembly in less than a minute with a simple stick. Black fiber glass reinforced Nylon construction.

Maple Leaf VSR/GBB 70° Autobot Silicone Hop Up Rubber

Maple Leaf AEG MR Hop Silicone Hop Up Bucking 60° Chamber Packing.

Action Army T10 Sound Suppressor Connector Type B

The TNT TR-Hop is an effective and simple to use bucking, it offers good compression and has a long concave patch for increased range and accuracy.

The TR-Hop series of buckings work well with a variety of barrels and nubs, including the TNT T-Nub and

TNT Kit for the KWA MP7, offers better range, accuracy and loading.

T-N.T. Located Directional Rubber for KWA-MP7 x1
T-N.T. Precision Air-cushion inner barrel 170mm x1
T-N.T. MP7 Outer barrel x1、
Screws x2
T-N.T. MP7 Adapter x1 (R 12 thread→L 14 t

Precision Double I/D Air-cushion inner barrel by TNT Airsoft.

The TNT barrels are an unusual but effective barrel that starts out at 6.03mm and expands out to 6.35mm with specialised channels cut into the last section.

The idea behind this is to red

Precision Double I/D Air-cushion inner barrel by TNT Airsoft.

The TNT barrels are an unusual but effective barrel that starts out at 6.03mm and expands out to 6.35mm with specialised channels cut into the last section.

The idea behind this is to red

Precision Double I/D Air-cushion inner barrel by TNT Airsoft.

The TNT barrels are an unusual but effective barrel that starts out at 6.03mm and expands out to 6.35mm with specialised channels cut into the last section.

The idea behind this is to red

GEOFFS™ NATURAL PRECISION™ Bio BBs 0.28g 1000 Green Tracer

GEOFFS™ SUPER NATURAL PRECISION™ PLA based Bio BBs, containing no harmful or toxic materials and manufactured to the highest industry standards are a forefront in quality to enhance the performance of your game.

Maple Leaf DECEPTICON Hop Up Bucking 50 Degree

The all-new Maple Leaf Decepticon hop up which features a high quality pressure seal reducing power loss and stabilizing the BB trajectory. Maple Leaf are a well-known brand from Taiwan for making quality

Durable, robust 90° design prepared for strongest upgrades

- ALL Stainless steel construction
- Preserved safety function ( use original safety lever )
- Adjustable trigger OVER-TRAVEL
- DROP-IN instalation
- Optimized trigger pull ( around 0,5 lb

GEOFFS™ SUPER PRECISION™ BBS 0.30G 3000 WHITE

Nuprol 2.0 is the Ultimate Green Gas and has been the best selling green gas in Europe for years.

Compared to most gases on the market, you can expect to see more consistent FPS and better overall recoil.

32 piece precision tool set with aluminium handles. Complete with Flat/Cross/Allan/Hex key and Torx bits, allowing you to take down any airsoft RIF with ease.

The perfect kit to knock through the most common pins found in airsoft replicas - from folding stock pins to AK sight blocks. Gun Power Tools are airsoft-centred tool makers, bringing you essential kits that let you get your guns back up and running in no

Low pressure regulator with 100cm braided line
Low pressure regulator for HPA gearbox and Gas to Air conversion.

HPA throttle regulator polarstar, wolverine, valken gearbox
Low pressure from 0 to 150 psi.
Standards pii
Blocking possible
Output : N

MARUI AEP 7.4V 600mAh

Type: LiPo - Lithium Polymer
Voltage: 11.1 v
Capacity: 1250 mAh
Connector: Mini Tamiya
Continuous Rate: 20 C at 24 A
Burst Rate: 40 C at 48 A
Configuration: Stick
Dimensions: 18 x 15 x 105 mm



JST-XH Balance Leads
High Quality Silicone Lead

KJW SD2/ CZ75 One Piece
Hop up Chamber

Available in 3 sizes
4-slot
3-slot
2-slot

●For MLC-S2 Folding Chassis/MLC-LTR/Novritsch SSG10A3 Sniper Rifle
●Made from CNC machined aluminium with black anodized finish.
●M-LOK interface rail system for any M-LOK spec accessories like a bipod or