Collection

1350mAh LiPo 11.1V 20C AK Stick - Deans

Type: LiPo - Lithium Polymer
Voltage: 7.4 v
Capacity: 1250 mAh
Connector: Deans
Continuous Rate: 20 C at 24 A
Burst Rate: 40 C at 48 A
Configuration: Stick
Dimensions: 20 x 10 x 104 mm



Capacity - LiPo Batteries have an excellent Capacity to

This set contains 4 Pucks which are dual purpose to be used for short stroking or spacing your buffer tube.

This set can be used to short stroke your bolt travel. This will give you an increased cycle rate as the bolt doesn’t need to travel as far.

Available in 3 sizes
4-slot
3-slot
2-slot

●For MLC-S2 Folding Chassis/MLC-LTR/Novritsch SSG10A3 Sniper Rifle
●Made from CNC machined aluminium with black anodized finish.
●M-LOK interface rail system for any M-LOK spec accessories like a bipod or

TM G17 Gen5 120% Hammer Spring

Highlighted features

Made from High Strength Spring Steel
Hard Coating Prevents Corrosion
Enhances Blowback Kick
For TM G17 Gen5

Action Army VSR10 Bolt Cap , works with most TM spec VSR cylinders.

Designed and manufactured in Taiwan, this is an excellent quality and uniquely designed quick release holster specifically for the Action Army AAP-01 series of pistols.


Your AAP-01 can be fitted with the folding stock, lasers, lights or any of the Im

The CTM AAP-01 AP7-SUB CCW 14mm Thread Adapter - Black replaces the stock flash hider and adds an extended 14mm CCW thread, allowing you to fit a suppressor yet still holding the front end in place onto the pistol.
CNC'd Allow
Specifically for the AP7-S

PULSAR S HPA Engine repair kit consists of:

2x O-ring 7x1mm
2x O-ring 8x1mm
1x O-ring 20x1mm

It allows you to connect exactly one accessory that requires supply power and maximum two multifunctional accessories like bolt-catch and magazine sensor set that don't require a power supply, at the same time.
With the divider, multifunctional ports are

ASTER V2 SE raises the price-performance ratio by including a Quantum Trigger in the set and new functions programmable via trigger. Now, out-of-the-box, you can set sensitivity from ludicrous touch through hair to full movement. Improved programming via

CTMA FUKU-2 Frame CNC Magazine Release Set for AAP-01 / AAP-01C

Designed specifically for the AAP-01 and AAP-01C, this magazine catch is lightweight and extends the magazine release button slightly further out from the frame, making for easier and fas

CTM AAP-01 Selector Switch Charging Handle - Type A
This is one of the nicest takes on the AAP-01 external Selector Switch, by incorporating it into the charging handle!
Fully CNC'd and supplied with everything needed to fit and secure it in place, this

The M.D.D. Hop Unit is completely redesigned compared to the Hop chambers that are fitted as standard in the current training weapon platforms on the market and allow the Hop unit to be adjusted a lot easier via the ejection port in a similar way to a sta

Better than the original loader that came with your AKM, it’s not the fastest when loading the tube with 15 BBs multiple times. Jamming them down with that plastic rod like your life depends on it can be frustrating if you’re in a rush and the next game i

New & Improved Rebel Precision Bio BBs Are Here. Produced in Taiwan Exclusively for BZ Tactical.

Designed to work with all barrel types from tight-bore to wide-bore and everything else in between,
our BB’s are perfectly spherical, highly polished and

Tokyo Marui Hi-Capa 5.1 Spare Mag

31 Round capacity.

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

Longbow 1000 x 0.36 white high polished bb's

Mini Grip Hand Stop (M-LOK) CNC 6063 Aluminium

MWS Enhanced Valve

AAP01 Enhance Piston Head V2

Highlighted features
Enhanced Piston Head for Air-Tightness.
Designed to withstand high impact pressure.
More Stabilized Performance.
More durability over TM piston head
High quality anti-oil rubber material
For AAP01

AAP01 Thumb Stopper available in different colours, make you're AAP-01 a bit tacticool

ZCL Airsoft Stainless Steel Precision Tight Bore Inner Barrel for AEG.

Length: 400mm.

Bore Diameter: 6.02mm.