Collection

Speedloader XL 470rds

Flat Type Hop-Up Tensioner Bridge Type

NUPROL 4.0 Ultimate Power Gas is a Ultra high performance gas for rifles and IPSC, designed to operate at lower temperatures (between 3c - 20c) allowing to use your weapon all year round.

Using this high power mix gives an increase in FPS, GBB efficien

Nuprol 3.0 is a power up gas designed for harder recoil and better shot consistency.

Compared to most gases on the market, you can expect to see more consistent FPS between each shot but also end up with a higher FPS reading at the end of your magazine

Type: LiPo - Lithium Polymer
Voltage: 11.1 v
Capacity: 1250 mAh
Connector: Deans
Continuous Rate: 20 C at 24 A
Burst Rate: 40 C at 48 A
Configuration: Stick
Dimensions: 18 x 15 x 105 mm



JST-XH Balance Leads
High Quality Silicone Leads

The same awesome hop nub for the Tokyo Marui MWS but now CNC machined from 7075 Aluminium!

If you are fitting an upgrade nub into the MWS gas rifle, it is one of the cheapest upgrades you can do with great gains compared to the standard setup.

There

Ares Amoeba Striker Sniper Rifle Magazine

ARES Amoeba ‘STRIKER’ S1 45rnd Magazine is a medium capacity magazine designed to fit the ARES Amoeba Striker Sniper Rifle. The magazine is constructed from Polymer, and is loaded from the top using 6mm Airsof

Action Army Lightweight Handguard for AAP-01 / AAP-01C

At under 100g for the handguard and rail, it's certainly lightweight! It mounts onto the under rail on an AAP-01C though you'll need an under rail for your AAP-01 to get this to fit.

Designed and manufactured in Taiwan, this is an excellent quality and uniquely designed quick release holster specifically for the Action Army AAP-01 series of pistols.


Your AAP-01 can be fitted with the folding stock, lasers, lights or any of the Im

PULSAR S HPA Engine repair kit consists of:

2x O-ring 7x1mm
2x O-ring 8x1mm
1x O-ring 20x1mm

blocking shooting when the magazine is pulled out. You can enable or disable this feature.

magazine BB counter reset. The function works with a programmable magazine capacity limit.

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

New & Improved Rebel Precision Bio BBs Are Here. Produced in Taiwan Exclusively for BZ Tactical.

Designed to work with all barrel types from tight-bore to wide-bore and everything else in between,
our BB’s are perfectly spherical, highly polished and

New & Improved Rebel Precision BBs Are Here. Produced in Taiwan Exclusively for BZ Tactical.

Designed to work with all barrel types from tight-bore to wide-bore and everything else in between,
our BB’s are perfectly spherical, highly polished and have

ZCL Airsoft Stainless Steel Precision Tight Bore Inner Barrel for AEG.

Length: 247mm.

Bore Diameter: 6.02mm.

ZCL Airsoft Stainless Steel Precision Tight Bore Inner Barrel for AEG.

Length: 433mm.

Bore Diameter: 6.02mm.

The Viper VX Buckle Up Carrier Gen2 is a modular vest designed to carry a variety of VX System and MOLLE compatible accessories. With quick release buckles throughout as well as multiple hook and loop panels, you can create a unique set up that fits your

BBs are the most underrated factor when it comes to accuracy. No matter how perfect your airsoft gun is, it will always be limited to the tolerances and the weight of the BBs used.

One bag contains 2500 white BBs.

BBs are the most underrated factor when it comes to accuracy. No matter how perfect your airsoft gun is, it will always be limited to the tolerances and the weight of the BBs used.

One bag contains 2500 white BBs.

SINGLE TICKET. This ticket grants entrance to Event Op Empire Rising for 1 sniper.


LOCATION:
Private woodland. Dormansland Surrey RH7 full address will be shared closer to event.

TIME:
08:00-8:45 ARRIVAL
8:45-9:45 SIGN IN AND BRIEF
10:00

The blade-style Fastlink has a lightweight, economical range design that provides complete coverage and eye protection.

Its flexible and durable matte black frame is equipped with a soft thermoplastic rubber nosepiece and temple tips to create a comfo

CNC Aluminum.
for GHK 553 GBB
Options:
50 degree (green) for muzzle velocity below 110 m/s
60 degree (yellow) for muzzle velocity 90-120 m/s
70 degree (blue) for muzzle velocity 110-140 m/s
75 degree (red) for muzzle velocity 130-150 m/s
80 degree

Material: Steel with QPQ Coating

MARUI MWS Version

Amomax MOLLE attachment is an optional carrying style in tactical situation and airsoft events. This versatile one can be mounted tightly on any MOLLE system, such as body armor, vests, bags and more.

Only one screw needed for replacement, which can sa