One piece CNC Alloy construction outer body for total precision, tested with all leading buckings, and good quality un-bridged GBB barrels. The outer body contains the drilling guide for installation into your chosen AAP upper. No need for extra drill gui
The new Flamingo VSR/GBB Gen3 (2023) bucking from SniperMechanic. Improved contact patch, placement and materials.
This bucking will fit any rifles/pistols that use the VSR/GBB style bucking.
This bucking was a long time project in the making, one o
Pre-upgraded MK23, built and ready to go.
Comes pre installed with:
MK23 Socom
Hadron M-TDC
Hadron H-Arm V2
50A Flamingo New Version
MK23 Crazy Jet
These are able to hop 48's perfectly and are the go to setup for the MK23.
The new Flamingo VSR/GBB Gen3 (2023) bucking from SniperMechanic. Improved contact patch, placement and materials.
This bucking will fit any rifles/pistols that use the VSR/GBB style bucking.
This bucking was a long time project in the making, one o
Allows adjustment of the Mk23 Hop up, externally, without loosing the slide movement feature. Fits in 2 minutes. Highly Effective.
Will install directly into Tokyo Marui, STTI, ASG, SSX23 & HFC Mk23’s
M-TDC is the new design from Hadron Designs, and
AAP-01 Short stroke kit, including a Hadron Designs specific 300% upgraded spring.
We tested 150, 200, 230% variation springs with most leading buckings.. But our 300% gave 100% feeding consistency in most SS (shortstroke) applications.
The shortst
The 380 boasts almost flawless reliability, which is still relatively unknown to most people. Manufactured in nylon, it comes with a choice of m16cw or m14ccw thread and a variety of front sight colours to suit individual preferences.
It features a gh
H arm V2
You wanted more.. we listened.
Taking on feedback from users :
Drop in hop arm replacement for the Mk23 and certain Glock based airsoft pistols
For optimal use, we recommend the Hadron Airsoft Designs M-TDC with logic plate, however a si
The legendary Hadron Airsoft Designs G17/G18 TDC has been re-designed, and improved for 2023.
This part allows external adjustment of the G17/G18 Hop up. Best to use good quality rubber, (ideally the Snipermechanics Flamingo 50 or 60), and use good qua
New design to both internal and external features, including a free flow exit path for the the bb
Magazine can be loaded via lips, or usual bottom of magazine area.
Nice bright colour, which helps locating dropped mags in the wild.
Manufactured i
The Loki stealth, AAP01 top external adjustable rail for the Hadron Airsoft Designs "Loki" Hop unit.
Stealth uses a friction lock system, it's quiet quick, and effective. Zero hop self adjust on even high ROF builds.
External Matt black adjustable s
HADRON AIRSOFT DESIGNS H PLATE
The Hadron Airsoft Designs H plate, designed to fit under the hop arm of the G17/G18 (excl. WE), Mk23. ASG, STTI, and TM
Works best with Flamingo or Maple Leaf Auto bot bucking.
The H plate increases the pressure o
Introducing the new Hadron Airsoft Designs Mk 23 "Saviour" magazine retention system.
As much as we love the Mk23, there has always been one issue which plagues all users, new and old.
Loosing magazines.
We used tape, elastic, velcro, rubber band
The 380 boasts almost flawless reliability, which is still relatively unknown to most people. Manufactured in nylon, it comes with a choice of m16cw or m14ccw thread and a variety of front sight colours to suit individual preferences.
It features a gh
Allows adjustment of the Mk23 Hop up, externally, without loosing the slide movement feature. Fits in 2 minutes. Highly Effective.
Will install directly into Tokyo Marui, STTI, ASG, SSX23 & HFC Mk23’s
M-TDC is the new design from Hadron Designs, and
Hadron Airsoft Designs CNC H plate V2
We revisited the classic, the one that started it all, the H plate. We gave it a few improvements, and tweaks.
Revised profile for the latest buckings on the market.
Enhanced upper edge profiling and chamfering
Hadron Airsoft Designs RD80 Supplied in KIT form.
Assembles in minutes. Highly effective. 80mm length.
Screw on fitment M16 clockwise thread.
Introducing the Hadron Airsoft Designs "Quark" TDC click adjuster for the Loki AAP TDC hop unit.
The "Quark" is the next product in line to complement the AAP-01 Hadron Loki TDC hop unit.
You have been asking since the day Loki was announced, for a
Welcome to the first in the long line of collaboration products with the great Snipermechanics. Hadron Airsoft and Snipermechanics have worked on projects together for years, however, this is our first public joint product in the portfolio. Introducing Th
Hadron "Hot Lips" magazine feed lip SINGLE
New design to both internal and external features, including a free flow exit path for the the bb
Magazine can be loaded via lips, or usual bottom of magazine area.
Nice bright colour, which helps locati
Kit contains 1 RIS adaptor for Hadron Airsoft Designs M-TDC logic plate, and 1 Allen bolt to secure.
This kit does not contain the red-dot sight, the LOGIC adaptor plate, or the M-TDC chassis itself.
An M-TDC Chassis, and 3 screw Logic Plate is requ
Revised profile for the latest buckings on the market.
Enhanced upper edge profiling and chamfering to provide better fitment in various platforms
Orange in colour, to identify the variant.
CNC machined aluminium
Very popular in the AAP-01, and G17/
HADRON AIRSOFT DESIGNS FANG PLATE
New product, the Hadron Airsoft Designs FANG plate, designed to fit under the hop arm of the G17/G18 (excl. WE) and Mk23. (ASG, STTI, TM).
Suitable for Flamingo or Maple Auto bot alternatives.
Replacement AAP nozzle retaining screws by Hadron Airsoft Designs, manufactured in marine grade stainless steel.
Pre-threalocked allen bolts.
Supplied in pairs. (that is 2 screws per order)
Unscrew the black "cheesium" standard screws, and insert