Cylinder & Cylinder Head

The Tac-41 Damper Cylinder head is an upgraded head designed to pair perfectly with the W.A.S.P. This is the GBB version, which comes in a few different variants depending on what you need.

It features a dual bore nozzle design and a built in 40A dampe

TAC41 GBB Hop Chamber Kit for Silverback Airsoft Sniper Rifle

Upgrade your Silverback TAC41 airsoft sniper rifle with our premium GBB Hop Chamber Kit, designed for precision, reliability, and ease of use. This kit is engineered to enhance your rifle’s

The VSR10/SSG10 Damper Cylinder head is an upgraded cylinder head designed to pair perfectly with the W.A.S.P.
It features a dual bore nozzle design and a built in 40A damper pad to reduce sound and vibration of the rifle.

Tested and compatible with b

For Tokyo Marui VSR10/ MLC-338 Sniper Rifle
Big bore high volume cylinder set with larger piston (please do not use with original cylinder)
Compatible with CNC "Hen Li Hai" Zero Trigger
New piston cocking/loading indicator will "Rise up" to show the pi

The Tac-41 Damper Cylinder head is an upgraded head designed to pair perfectly with the W.A.S.P.




It features a dual bore nozzle design and a built in 40A damper pad to reduce sound and vibration of the rifle.

This will work with SBA products t

PSS VSR-10 Silent Damper

MAX AIR VOLUME SYSTEM
​FOR : MARUI-VSR SERIES.

The VSR series air powered bolt action sniper rifle has been around for a long time, it has always been one of the favorite airsoft sniper rifles. In addition to excellent performance, numerous performanc

The Action Army Twisted Cylinder Kit for VSR10 / MB02 / MB03 / T10 is designed to reduce friction in order to maximize efficiency, all while looking awesome

Design: Tokyo Marui VSR-10 (Including G-Spec), Well MB02 / MB03, Action Army T10/T11, other VSR

The Action Army teflon cylinder kit for the VSR-10 and VSR10 clones is an upgraded cylinder with cylinder head, works very well and with most TM VSR10 spec pistons.
Compatible with Marui VSR-10 & clones, HFC VSR 11, JG BAR-10
Teflon Coated
Stainless

Action Army High quality replacement cylinder and stainless steel cylinder head for ARES Striker series rifles.

Great build quality and performance

Total weight 125g

ID Approx. 22.0mm

OD 24.1 – 24.2mm

Action Army VSR10/T10 Guide Rings, designed to work with VSR10 and VSR10 clone rifles. can be used to replace worn guide rings.

New vortex twisted cylinder for VSR and VSR based clones.

This set allows you to adapt the power of your SSX303.
Not compatible with the SSX23.

Easy installation within minutes.

With different gases, BBs, and Hop Up setting, these nozzles can produce a wide range of power levels.

0.8-1 Joule – 2.3 mm i

Rubber Set for Tanaka M700 / M24 / L96

Maple Leaf Stainless Steel VSR Upgrade Cylinder + Guide Ring.

New Double Cut version for use with Maple Leaf Quick Detach system

Maple Leaf Airsoft VSR Black Mamba Steel Cylinder

LayLax VSR-10 Air Seal Damper Cylinder Head for VSR10 rifles and clones. Made of steel and includes a rubber damper pad to reduce noise.

VSR-10 Upgrade Stainless Steel Cylinder Head for VSR-10 Series

The stainless steel drilled cylinder will give your SSG10 a unique look. Less contact surface results in smoother bolt pull.

Nozzle length and angles adjusted for a smoother action, better loading position and better feeding in the hop unit, made of steel coated black.

A worthwhile upgrade for the Ares Kar98k!

TAC-41 cylinder head “GBB”

Optional cylinder head for the TAC-41, “GBB” version, for optional/GBB hopup unit (SBA-HOP-31). 4.60 internal diameter nozzle, Oring included, stainless steel CNC construction.

Compatible with (must be used with a “GBB” ho

Amoeba Striker Loading indicator for AS02.

Some SSG10 owners reported a slight cylinder wobble which can be fixed with this glidering. However, only a very small percentage of users were affected. If you’ve never experienced a wobbly cylinder, there is no need to get the gen2 glidering.
The diffe