Hop Unit Parts

Amoeba Striker Hop Up Adjusting Wheel AS01

Replacement VSR 10 hop unit click pin

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

T-NUB / T-HOP bucking / AEG or GBB

​●Width 3.9mm
●Material : rubber
​●Cut to size according to the situation

The hop-up chamber uses a new and innovative system

for extremely precise adjustment of pressure placed upon the hop-up bucking.

Adjustable hop-up damping for the user's preference.

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

Improved Design Flight Path
Better Holds Hop-Up Setting
Easy Installation
Designed for Tokyo Marui VSR-10 Series Airsoft Spring Cocking Sniper Rifle

TAC-41 original hopup unit. Parts included:

– T41-0201 hopup body (aviation grade CNC construction)

– T41-0202 hopup wheel

– T41-0203 concave nub

– T41-0224 feeder

– T41-0225 feeder spring guide

– T41-1008 spring
– HOP-116001 60° flat h

Maple Leaf VSR Hop Up Unit / Chamber Set.

For MARUI VSR-10, DT-M40, HFC VSR-11

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

Gen 2 TAC-41 Feeding Ramp

Action Army CA M24 Hop Up Chamber.

The chamber is CNC machined, very well designed and is an upgrade over the existing chamber, offer better hop adjustment, seal and consistency.

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

vsr10 Hop Up Block

TAC-41 Hopup unit, “GBB” type

TAC-41 optional hopup unit, for “GBB” inner barrel & “GBB” hopup rubber. Parts included:

– T41-0226 hopup body “GBB” (aviation grade CNC construction)
– T41-0227 hopup rubber socket (aviation grade CNC construction)

Amoeba Striker Hop Up Chamber

Upgrade hop chamber for the Amoeba Striker Series, works well with aftermarket nubs such as the Maple Leaf Omega Nub

Rubber Set for Tanaka M700 / M24 / L96

SRS/TAC41 Hop Up rubber set for SRS (50°,60°,70° and 80° +4 nubs)

SBA-HOP-24

L96 Mag Catch

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

Spare part for the SSG-10. It sits in the front of the bucking to create a better seal between the bucking and the inner barrel.

SRS Hop Up rubber set for SRS (50°,60°,70° and 80° +4 nubs)

A unique mixture of ingredients
Finer-range adjustability of BB's trajectory
More consistent on the Hop-Up pressure
Compatible with all Marui spec AEGs
Recommend using it with our Flat Hop-Up bucking