Collection

For GBB/VSR10 spec inner barrel and without modify.
●Addition of a slimmed down black air-seal ring for better efficiency.
●The "Shield" shape groove design has better hop effect when tensioner/lever press it.
●Larger & wider contact area inside of BB

CTM AP7-SUB replica SMG KIT for the Action Army AAP-01 - Black is a replacement upper frame complete kit with everything you need to build the lowest cost SMG-A-Like on the market. This is no cheap plastic shell or 3D print. It's made from 30% blend nylon

An enlarged open magazine pouch made to hold extended pistol mags as well as most SMG mags. The pouch is designed with regards to fast reloads, allowing you to adjust the retention by tightening/loosening the elastic cord. It comes with a stylish Laser Cu

Maple Leaf 91mm 6.02mm Inner barrel.

Hybrid cut for use in GBB and AEG.

Requires Maple Leaf Hybrid or Hot Shot bucking if used in an AEG.

Extremely powerful performance gas. Suitable for winter use and with high end metal pistols and rifles. Improper usage may result in damage to pistols, rifles, grenades and magazines. Features a very stable gas pressure, exceptional trajectory control, lo

H arm V2

You wanted more.. we listened.
Taking on feedback from users :
Drop in hop arm replacement for the Mk23 and certain Glock based airsoft pistols

For optimal use, we recommend the Hadron Airsoft Designs M-TDC with logic plate, however a si

The new Flamingo Noir VSR/GBB bucking from SniperMechanic. 

This bucking will fit any rifles/pistols that use the VSR/GBB style bucking.

This bucking uses the same tried and true design of the Flamingo bucking, but using a NBR based material vs the

CTMA FUKU-2 Nylon Frame for AAP-01 / AAP-01C - Black

Designed specifically for the AAP-01 and AAP-01C, these change the look and feel nicely, giving a hybrid XDM/Glock vibe to the frame.

Remember to order the CTMA FUKU-2 Frame Plastic Side Panel (Gr

Durable, robust 90° design prepared for strongest upgrades
Stainless steel construction and CS steel sears
Preserved safety function ( use original safety lever )
Adjustable trigger OVER-TRAVEL
DROP-IN instalation
Optimized trigger pull ( around 0,5

AAP-01 Short stroke kit, including a Hadron Designs specific 300% upgraded spring.

We tested 150, 200, 230% variation springs with most leading buckings.. But our 300% gave 100% feeding consistency in most SS (shortstroke) applications.

The shortst

Introducing the KMCS Camouflage crafting Suit, available in both the Dark Forest and Woodland floor variants. Crafted from an exceptionally durable mesh, this suit provides the ideal foundation for constructing your ghillie suit using 2.5mm cable ties whi

Heroshark hex mesh Mako airsoft goggles. These have been crafted inhouse using
Ridgid cordura on the upper section. Lycra nose and lower section. Conceals the bit of face often shown between the goggles and balaclava.

Amomax Per-Fit holster is high compatibility to fit more than 80 airsoft or handguns, such as Glock, Sig Sauer, CZ, Ruger, Springfield Armory, Beretta, Smith & Wesson, 1911 series, and etc.

Most shooting enthusiasts own more than 1 handgun. It’s costly

TTI Infinity AAP01/ AAP01C One piece Full CNC TDC hop up chamber

Amomax Desert Eagle Holster
This holster is designed to fit most Desert Eagle replicas with or without tactical rails.

A classic design holster by Amomax with a trigger locking retention system and their 360-degree rotation to angle is any way you’d l

Rapax 2+ J spring (2+Joule/Blue) – SRS/Tac41/SSG10,24,96
Thousands of happy users use our springs in their Silverback SRS/Tac41, Novritsch SSG10, SSG96, SSG96, …

Springs are 13mm outer diameter, so they fit all above mentioned sniper replicas.

Rapa

The new 2021 “ Illuminator” is a clip on MK23 Fibre Optics sight system that simply clip over the original iron sights giving an enhanced sight picture using luminescent rods. The aim of the product is to give the user the option to have brighter and more

The Amped Line was developed during the rise in popularity of High Pressure Air (HPA) Airsoft systems in the United States. To provide a superior alternative to other lines on the market at the time, the Amped Line was born.

Our Amped Heavy Weave lin

A revolutionary airsoft sniper trigger for VSR10 AND SSG10 that uses magnets instead of springs and a bushing to eliminate cylinder scratching. Gen 2 features stronger magnets for extremely reliable sear resetting, and a Delrin bushing for even smoother o

AAP01/C TM-G18C
Stainless Steel Hammer Set

Yet another upgrade for your treasured AAP-01(s) in the form of an aluminium CNC'd solid upper receiver. So, what does it offer?

It's solid CNC'd aluminium for a start with a huge picatinny rail along the top and 5-point rail under the front section. T

MK23 Rapid Retention holster

Unique side-access design holds the MK23 through the trigger guard and against the top slide
Accepts the TM MK23, the STTI/ASG versions and the SSX-23 along with most standard and aftermarket suppressors, plus the LAM, tac

Infinity TDC Hop Up Chamber for Umarex / GHK G17 Gen5 MOS-BK

THE BEST LOOKING PART WE HAVE MADE SO FAR, THE ADVANCED ADJUSTMENT WHEEL FOR MTW HOP-UPS!
The new Advanced Adjustment Wheel is available in Red, Purple & Black and now in Green and Gold/Orange! You can introduce colors to your MTW or Article1! For those