Collection

Introducing the KMCS Camouflage crafting Suit, available in both the Dark Forest and Woodland floor variants. Crafted from an exceptionally durable mesh, this suit provides the ideal foundation for constructing your ghillie suit using 2.5mm cable ties whi

The full summer kit contains a large amount of Adaptive Ghillie mesh 2.0 in 3 shades of green. This second generation of AGM is stiffer and comes in two different widths of ribbon. Also included in the pack are summer dead leaves, coconut rope, green raff

Yet another upgrade for your treasured AAP-01(s) in the form of an aluminium CNC'd solid upper receiver. So, what does it offer?

It's solid CNC'd aluminium for a start with a huge picatinny rail along the top and 5-point rail under the front section. T

Hadron Airsoft Designs TM HK45 TDC

Allows external adjustment of the TM HK45 Hop up. The Hadron Airsoft Designs TM HK45 TDC is supplied with a matching nub, to optimise the bucking deformation.

With good quality rubber, BBs of 0.3g to 0.5g can be us

Maple Leaf 91mm 6.02mm Inner barrel.

Hybrid cut for use in GBB and AEG.

Requires Maple Leaf Hybrid or Hot Shot bucking if used in an AEG.

New design to both internal and external features, including a free flow exit path for the the bb

Magazine can be loaded via lips, or usual bottom of magazine area.

Nice bright colour, which helps locating dropped mags in the wild.

Manufactured i

Designed and manufactured in Taiwan, this is an excellent quality and uniquely designed quick release holster that follows the original CTM AAP-01 holster. The CTM GA model will also fit the AAP-01 but was redesigned to include every other series of GLOCK

The CTM FUKU-2 Glock / AAP-01 Magazine Floor Base Plate is a very nicely made replacement base plate.

Featuring a smooth yet angled design, not only will it help protect the magazine if it's dropped, it'll give a little extra finger room for those with

1.Function: VIS laser( constant on/strobe), IR laser( constant on/strobe)
2.The brightness of VIS laser & IR laser can be adjusted
3.The ' + ' button is for Brightness enhancement ; the ' - ' button is for Brightness reduction; the middle button is for

Heroshark hex mesh Mako airsoft goggles. These have been crafted inhouse using
Ridgid cordura on the upper section. Lycra nose and lower section. Conceals the bit of face often shown between the goggles and balaclava.

Rapax 2+ J spring (2+Joule/Blue) – SRS/Tac41/SSG10,24,96
Thousands of happy users use our springs in their Silverback SRS/Tac41, Novritsch SSG10, SSG96, SSG96, …

Springs are 13mm outer diameter, so they fit all above mentioned sniper replicas.

Rapa

This chest rig was designed for players who prefer the comfort of running a low-profile setup without making compromises on their gear.

Minimal chest rig features:

Made out of very durable Nylon 1000D.
Molle compatible with the Laser Cut design.
A

Introducing the new Hadron Airsoft Designs Mk 23 "Saviour" magazine retention system.

As much as we love the Mk23, there has always been one issue which plagues all users, new and old.

Loosing magazines.

We used tape, elastic, velcro, rubber band

TTI TM Gen3 G17 Spec/WE G-series Fixed outer barrel-BK Type A (external -14mm teeth with front cap)

TTI Infinity AAP01/ AAP01C One piece Full CNC TDC hop up chamber

The new Flamingo VSR/GBB Gen3 (2023) bucking from SniperMechanic. Improved contact patch, placement and materials.

This bucking will fit any rifles/pistols that use the VSR/GBB style bucking.

This bucking was a long time project in the making, one o

CTMA AAP-01/C 7075 Advanced Bolt Lite - Silver

A nice CNC 7075 Aluminium replacement for the stock bolt in the AAP-01 and AAP-01C!

· There are M5 screw holes for other handles to be installed.
· Can be used with AP7.
· Not compatible with charging

The CTM AAP-01 7075 Alu ADVANCED Superlight Bolt is a highly lightened hi-tech version of the original plastic bolt. This ADVANCED (or Mk2) version is 5g lighter than the original CTM superlight bolt and as such, increases the rate of fire even more and s

For Tokyo Marui VSR10/ MLC-338 Sniper Rifle
Big bore high volume cylinder set with larger piston (please do not use with original cylinder)
Compatible with CNC "Hen Li Hai" Zero Trigger
New piston cocking/loading indicator will "Rise up" to show the pi

KMCS Balaclava, featuring the KMCS randomised realistic 3D leaf pattern and elongated beard which can be used to help reduce shadowing which will often give a user away against more experienced spotters.

The KMCS Balaclava has two way adjustment to ens

ZCL Airsoft Stainless Steel Precision Tight Bore Inner Barrel for GBB.

Length: 83.7mm.

Bore Diameter: 6.02mm.

The Loki stealth, AAP01 top external adjustable rail for the Hadron Airsoft Designs "Loki" Hop unit.

Stealth uses a friction lock system, it's quiet quick, and effective. Zero hop self adjust on even high ROF builds.

External Matt black adjustable s

These are Pre-Upgraded with:

Maple Leaf Hi-Capa chamber set
Maple Leaf Hi-Capa Adjustment Wheel
SniperMechanics 50 Degree Flamingo
DaVinci 113mm 6.01 Raizen Inner Barrel

full length: 222 mm
Gun Height: 112 mm
Weight: 850 g (With Magazine)
Bull

CTMA AAP-01/C FUKU-2 Reaper Kit - Picatinny Stock Adapter and RMR Mount

The REAPER is a cutting-edge pistol carbine kit crafted from high-strength 6061 aluminium using 5-axis precision machining. The kit includes an ambidextrous QD sling mount made fro